InterMIND

How to check your network and switch camera, microphone or speakers during a video call — without leaving it (2026)

When a call sounds wrong, the question is whose side it is on. In InterMIND every participant, not only the host, opens the network statistics from the Devices section of the meeting settings, switches camera, microphone and speakers from the device submenu without dropping audio or video, and can run the test room before the next call with no account and no link. Where each control lives, what the statistics show, what happens when a device is unplugged mid-call, and which settings survive the session.

The Mind.com Team

  • Both live inside the call. Network statistics are under Devices in the meeting settings, open to every participant; devices switch from the control-bar submenu without dropping the call.
  • Only your language follows your account. Resolution, self-view and picked devices last one session, meeting defaults stay on the browser; the test room checks everything beforehand.
  • InterMIND keeps the whole meeting in each member's language, voice, chat, files and the recap, the same diagnostics for everyone. Guests join free by link, no account; you pay only for active members.
How to check your network and switch camera, microphone or speakers during a video call — without leaving it (2026)

How to check your network and switch camera, microphone or speakers during a video call — without leaving it (2026)

"You're breaking up" is a diagnosis nobody can act on. If you searched "check connection during a video call" or "switch microphone without leaving the meeting", the short answer for InterMIND is that both live in the meeting itself: the network statistics are in the Devices section of the meeting settings, open to every participant, and the camera, microphone and speakers switch from a submenu in the control bar without dropping the call. This guide is the rest: where each control is, what to look at, what happens when a device disappears mid-call, and what to check before the next one.

The network statistics, for everyone

Open the cockpit Settings (the gear in the More menu) and expand Devices. The Network statistics panel is there — for every participant in the room, not only the host or a moderator. Read it when the call degrades: it separates a weak link on your side from one on the speaker's, which is the question the room is really asking.

If the numbers are the problem, two levers are next to them: the Resolution control caps the video resolution at 720p, 360p or 180p to save bandwidth on a slow connection, and the Self-view toggle hides your own tile while you present.

Open the video page

Switch a device without leaving

The control bar's microphone and camera buttons each have an arrow: it opens the device submenu — every microphone, camera and speaker the browser can see, in one place. Pick another one and the call continues on it; switching mid-call no longer leaves the room without audio or video, because the engine reacquires the device from the live list and retries if the first attempt fails.

A device that is unplugged, or taken by another application, is reacquired the same way when it returns. The audio-level indicator on the microphone button shows whether the microphone is picking anything up.

Which settings survive

The meeting settings are split in two:

  • Per session — what you set for this call: resolution, self-view, the devices picked from the submenu.
  • Persistent — what InterMIND remembers between calls on this browser: your meeting defaults. The one meeting preference synced to your account rather than the browser is your translation language, set from the account menu.

The pre-join screen appears the first time you join on a device and again whenever your camera, microphone or speaker setup has changed since — so a new headset is offered to you before the call, not discovered in it.

Before the next call: the test room

The test room is a meeting-shaped page with nobody in it: your camera preview, your microphone level, your speakers, screen sharing, and the network — whether it reaches the outside world, how fast it answers, and a five-second bandwidth estimate against 360p, 720p and 1080p. One badge at the top says how many checks came back short. No account and no meeting link needed; the camera and microphone you pick there are the ones your next meeting starts with.

FAQ

Can participants see the network statistics, or only the host? Every participant. Open Settings from the More menu, expand Devices, and the Network statistics panel is there for everyone in the room.

How do I change my microphone during a call? Click the arrow next to the microphone button and pick another device from the submenu. The call continues on it; the same submenu holds cameras and speakers.

My headset was unplugged mid-call. Do I have to rejoin? No. When it returns, the engine reacquires it from the live device list and retries if the first attempt fails.

How do I test my setup before a meeting? Open the test room at intermind.com/browser-test: camera, microphone, speakers, screen sharing and a network check, no account and no link needed.

Which settings are remembered? Meeting defaults are kept per browser; your translation language is synced to your account; resolution, self-view and the devices picked from the submenu apply to the current session.

Try it

More in Video meetings

All posts in Video meetings
Translated captions, live translation and an AI copilot during the meeting: how each participant gets them inside an InterMIND room (2026)
Video meetings

Translated captions, live translation and an AI copilot during the meeting: how each participant gets them inside an InterMIND room (2026)

A new class of meeting copilot sits beside the call in a browser tab and shows one person a live transcript in their language, translated, with AI help while the conversation runs. Here is how the same job is done inside the room in InterMIND — the host provides it for everyone, each participant reads and hears in their own language, the transcript and recap stay afterwards — and where the honest limits are.

The Mind.com Team

How live translation, captions, and a searchable transcript work together in one InterMIND meeting
Video meetings

How live translation, captions, and a searchable transcript work together in one InterMIND meeting

Voice translation, live captions and a searchable transcript are turning up together as a single marketed bundle across meeting and workplace platforms. What that bundle actually means differs a lot from vendor to vendor — most product pages state the three features without saying how each behaves: who has to turn it on, what a guest gets, or what "searchable" covers. Here is exactly how each of the three works in an InterMIND meeting, what is on by default, and where the honest limits are.

The Mind.com Team

How to hand over a meeting or a channel to another host — mid-call or when someone leaves the company (2026)
Video meetings

How to hand over a meeting or a channel to another host — mid-call or when someone leaves the company (2026)

The host of an InterMIND meeting or channel is the person the room bills to and the one who admits guests, manages members and ends the call for all. Make host hands that role to a colleague in one click — during a live call the new host becomes the moderator on the spot, and a team admin can do it for someone who has left. Who can hand over to whom, why the new host has to be a licensed member of the same team on a paid plan, what changes for the participants and what does not, and where the change is recorded.

The Mind.com Team

Get new posts and product updates by email

One email a month with new posts and product updates. Unsubscribe anytime.

How to add an external client or partner to a team chat channel — by email, with no account on their side yet (2026)

A client who lives in your channel instead of in your inbox. In InterMIND you add an outside person to a channel from the member drawer by their email: a registered user is in immediately, anyone else gets an email invite and joins on sign-up, and people you have already met in a meeting are marked Met before. From then on they read the whole channel — every message, every file, every recap — in their own language, and every call from the channel is theirs to join. Who can add, what an external member sees, the invite link and how to rotate it, and how this differs from a guest of a single meeting.

How to forward, select and bulk-delete messages in a team chat — and move through the history from the keyboard (2026)

Housekeeping in a team chat is four moves in InterMIND: forward a message or a whole thread to another channel or to your Inbox (from the menu, or by dragging it onto the channel), select several messages by dragging on blank space, delete the selection after one confirmation, and page through the history with PageUp, PageDown, Home and End even while you type. What travels with a forward and what does not, who may delete what, why a forward is staged as a draft instead of sent — and, quoted from their documentation, what Slack and Microsoft Teams state about forwarding a message.